Installing a new glass pane on a flat roof. Our steps: We removed two small old flatroof Velux windows. We removed the Torch & Felt where the glass pane was to be installed. We made a hole in the flatroof where the glass pane was to be installed. We made a timberframe for the glass…
New installation of Velux sun tunnel for the landing. Our steps: We removed the tiles, where the Velux sun tunnel was to be installed. We made a hole in the landing’s ceiling. We made a timber frame for the Velux sun tunnel. We fitted the new Velux rigid sun tunnel. We fit the tiles back….
Installation of a new Velux window on a flatroof. Our steps: We made the hole where the Velux window was to be installed. We made a timber frame at 15 degrees for the Velux window. We fitted the new Velux window. We covered the whole flatroof with fiberglass and top coat.
Owner wanted a sun tunnel for their landing, on the vertical wall. Our steps: We removed the tiles where the sun tunnel was to be installed. We made the hole on the vertical wall. We fitted the new Velux flexi sun tunnel. We fit the tiles back.
A house extention of 22 square metres and kitchen Renovation with assistance from a structural engineer. -We made a foundation. -We suspended the first floor with a steel beam 203 UC 71 with two colons 200 x 90 x 30 PFC on concrete pad footing. -We made a fiberglass roof with two Velux windows SK08…
The old window was already, too much decayed. So we replaced it with a much more efficient, new Velux window. Our steps: We removed the tiles, around the window. We removed the window. We fitted the new Velux Window, with its appropriate flashings and its insulated collar. We fit the tiles back.
The old window was small. So we replaced it with a bigger, new Velux window. Our steps: We removed the tiles, around the window. We removed the window. We made a new timber frame. We re-installed the breather membrane, around the window. We fitted the new Velux Window, with its appropriate flashings. We fit the…
The old window was decayed. So we replaced it with a much more efficient, new Velux window. Our steps: We removed the tiles, around the window. We removed the window. We fitted the new Velux Window, with its appropriate flashings and its insulated collar. We fitted the underfelt collar. We fitted the tiles back.
There were very old Velux windows in the roof with glass, internal damage but their frames were in good condition. Therefore, we only replaced the glass, inside all the Velux windows and they look brand new. Our steps: We took down the Velux window. We took off the glass flashing, before taking down the glass….
The house’s roof inclination was 12 degrees. This caused the Velux windows to have an interior leak. Because, Velux windows need to have a minimum of 15 degrees, advised by the Velux company itself. Our steps: We removed the metalic tiles, around the windows. We removed the windows. We built new window frames, with the…